Chery Amulet since 2006
	1. Car device
	2. Recommendations about operation
	3. Malfunctions in a way
	4. Maintenance
	5. Engine
	6. Transmission
	7. Running gear
	8. Steering
	9. Brake system
		9.1. Features of a design
		9.2. Possible malfunctions of brake system, their reason and ways of elimination
		9.3. Pumping of a hydraulic actuator of brake system
		9.4. Check and adjustment of a pedal of a brake
		9.5. Main brake cylinder
		9.6. Vacuum amplifier of brakes
		9.7. Replacement of hoses and tubes of a hydraulic actuator of brakes
		9.8. Brake mechanisms of forward wheels
		9.9. Brake mechanisms of back wheels
		9.10. Parking brake
		9.11. Anti-blocking system of brakes
			9.11.1. Replacement of sensors of frequency of rotation of wheels
	10. Electric equipment
	11. Body
	12. Appendices
	13. Electric equipment schemes

9-11-1-zamena-datchikov-chastoty-vrashheniya-koles.html

9.11.1. Replacement of sensors of frequency of rotation of wheels

It be required to you: a key-shestigrannik «on 5», a tester.

1. Disconnect a wire from the minus plug of the storage battery.

2. Remove a wheel from the relevant party.


3. Disconnect a block from a conclusion of the sensor of frequency of rotation of a wheel...	4.... turn out a fastening bolt...


5.... take the sensor of frequency of rotation of a wheel from an opening of a rotary fist of a forward suspension bracket...	6.... also remove the sensor.

7. Establish the sensor as it should be, the return to removal.

8. Similarly replace other sensors.