|
6-1-4-zamena-trosa-privoda-vyklyucheniya-scepleniya.html
6.1.4. Replacement of a cable of a drive of switching off of couplingFor replacement of a cable of a drive of switching off of coupling tools are not required.
|
|
|
|
1. In a motor compartment raise the lever of switching off of coupling on size of a free wheeling and remove a clamp of a tip of a cable.
|
2. Take a cable from lever openings...
|
|
|
|
|
3.... and support on a transmission case.
|
4. Take from an eye of the lever of switching off of coupling the dempfiruyushchy rubber loose leaf.
|
|
Note
Strongly deformed or hardened dempfiruyushchy loose leaf replace.
|
5. In car salon under the dashboard remove the top tip of a cable from the lever of a pedal of coupling.
6. Take a cable cover from an emphasis in a board of a front and remove a cable, pulling out it from a board in a motor compartment.
7. Establish a cable of a drive of switching off of coupling as it should be, the return to removal.
8. After installation of a cable adjust a drive of switching off of coupling (see. «Adjustment of a drive of switching off of coupling»).
| 