Replacement of the bearing of a back nave. Chery Amulet (since 2006 of release)
Chery Amulet since 2006
1. Car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
7.1. Forward suspension bracket
7.2. Back suspension bracket
7.2.1. Features of a design
7.2.2. Possible malfunctions of a back suspension bracket, their reason and ways of elimination
7.2.3. Removal and installation of an amortizatorny rack of a back suspension bracket
7.2.4. Repair of an amortizatorny rack of a back suspension bracket
7.2.5. Replacement of the bearing of a back nave
7.2.6. Replacement of a beam of a back suspension bracket
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Appendices
13. Electric equipment schemes
 






8c4a8411



7-2-5-zamena-podshipnika-zadnejj-stupicy.html

7.2.5. Replacement of the bearing of a back nave

The back nave and its bearing represent trudnorazbirayemy knot. In addition the bearing separately in spare parts do not deliver. Therefore at failure of the bearing replace knot assembled.
It be required to you: a dvenadtsatigranny face head «on 30», a chisel, a hammer.
1. Weaken an inhaling of bolts of fastening of a wheel.
2. Include the I transfer and establish an emphasis under forward wheels. Raise and establish on reliable support a back part of the car.
3. Remove the corresponding wheel.
5. Vypressuyte...
6.... also remove a protective cap of a nave.
7. Weaken an inhaling of a nut of a nave...
8.... also unscrew it from a pin.
9. Remove from a pin a nave assembled with the bearing.
10. Establish a new nave and all removed details as it should be, the return to removal.

«previous page
7.2.4. Repair of an amortizatorny rack of a back suspension bracket
following page»
7.2.6. Replacement of a beam of a back suspension bracket