8.5.2. Replacement of a tank of the hydraulic booster of the steering mechanism

It be required to you: a screw-driver with a crosswise edge, пассатижи.

1. Remove a stopper of a tank of the hydraulic booster of a steering and pump out working liquid from a tank (for example, a big syringe). Establish a stopper into place that dirt did not get to a tank.

2. Compress the unbent ears of a collar...	3.... shift a collar on a hose and disconnect from a tank soaking-up hose of the pump.

4. Similarly disconnect from a tank a drain hose of the steering mechanism.	5. Weaken an inhaling of a collar of fastening of a tank...

6.... remove a collar...	7.... and rubber ring.

Note Strongly pressed out, torn or hardened ring replace.

8. Remove a tank of the hydraulic booster of a steering from an arm.

9. Establish a tank of the hydraulic booster of the steering mechanism as it should be, the return to removal.

10. Fill in in a tank working liquid and remove air from system of the hydraulic booster of a steering (see. «Pumping of system of the hydraulic booster of a steering»).