9.5.1. Replacement of a tank of the main brake cylinder

It be required to you: a face head «on 13», a special key «on 11» for brake tubes, a screw-driver with a flat edge.

1. Unscrew a stopper of a tank of the main brake cylinder...	2.... also pump out from it brake liquid, for example, a medical syringe or a rubber pear.

3. Overcoming elastic resistance of connecting plugs, remove a tank.

Note Replacement of a tank is more convenient for carrying out on the removed main brake cylinder (see. «Replacement of the main brake cylinder»).

4. Take connecting plugs from openings of the case of the cylinder (if necessary hook them a screw-driver). Examine plugs and if there were signs of aging of rubber, replace them.

5. Establish a tank of the main brake cylinder as it should be, the return to removal.

Good advice For simplification of installation of a tank moisten connecting plugs with fresh brake liquid.

6. Fill in brake liquid and remove air from a hydraulic actuator (see. «Pumping of a hydraulic actuator of brake system»).