Replacement of the main brake cylinder. Chery Amulet (since 2006 of release)
Chery Amulet since 2006
1. Car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
9.1. Features of a design
9.2. Possible malfunctions of brake system, their reason and ways of elimination
9.3. Pumping of a hydraulic actuator of brake system
9.4. Check and adjustment of a pedal of a brake
9.5. Main brake cylinder
9.5.1. Replacement of a tank of the main brake cylinder
9.5.2. Replacement of the main brake cylinder
9.6. Vacuum amplifier of brakes
9.7. Replacement of hoses and tubes of a hydraulic actuator of brakes
9.8. Brake mechanisms of forward wheels
9.9. Brake mechanisms of back wheels
9.10. Parking brake
9.11. Anti-blocking system of brakes
10. Electric equipment
11. Body
12. Appendices
13. Electric equipment schemes
 










9-5-2-zamena-glavnogo-tormoznogo-cilindra.html

9.5.2. Replacement of the main brake cylinder

As practice shows, in many cases the cylinder partition in garage conditions does not lead to desirable result. Therefore in case of malfunction we recommend to replace the main brake cylinder assembled.
It be required to you: a face head «on 13», a special key «on 11» for nuts of pipelines.
1. Unscrew a stopper of a tank of the main brake cylinder...
2.... also pump out brake liquid from a tank, for example, a medical syringe. Establish into place a tank stopper that dirt did not get to it.
3. Unscrew a nut of fastening of the pipeline to the cylinder...
4.... also take the pipeline aside.

Good advice
Muffle pipelines in any available way (for example, having put on their ends protective caps of valves for production of air) to prevent an effluence of brake liquid.

5. Similarly unscrew a nut of fastening of the second pipeline to the main cylinder.
6. Unscrew two nuts of fastening...
7.... also remove the main brake cylinder assembled with a tank.
8. If necessary remove from the main brake cylinder a tank (see. «Replacement of a tank of the main brake cylinder»).
9. Establish details as it should be, the return to removal, fill in brake liquid and remove air from a system hydraulic actuator (see. «Pumping of a hydraulic actuator of brake system»).

«previous page
9.5.1. Replacement of a tank of the main brake cylinder
following page»
9.6. Vacuum amplifier of brakes