Check of level and liquid dolivka in a washer tank. Chery Amulet (since 2006 of release)
Chery Amulet since 2006
1. Car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance
4.1. General provisions
4.2. Daily service (EO)
4.2.1. Check of wheels
4.2.2. Check of level and an oil dolivka in system of greasing of the engine
4.2.3. Check of level and a dolivka of cooling liquid
4.2.4. Check of level and a dolivka of brake liquid in a tank of a hydraulic actuator of brake system
4.2.5. Check of level and a dolivka of working liquid in a tank of the hydraulic booster of a steering
4.2.6. Check of level and a liquid dolivka in a washer tank
4.2.7. Check of external lighting devices
4.3. Procedural maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Appendices
13. Electric equipment schemes
 






8c4a8411



4-2-6-proverka-urovnya-i-dolivka-zhidkosti-v-bachok-omyvatelya.html

4.2.6. Check of level and a liquid dolivka in a washer tank

It be required to you: in the summer — a concentrate of special liquid for the washer tank, dissolved with pure water; in the winter — nonfreezing liquid.

Good advice
Use nonfreezing liquid of production of the known firms, not containing methanol hazardous to health.
At temperature increase of air do not dilute nonfreezing liquid with a view of economy. Besides freezing temperature increase, at the diluted liquid washing properties sharply worsen.

Preventions
The manufacturer does not recommend use of usual water for filling of a tank of a washer.
Liquid freezing in a tank of a washer will lead to its destruction.

The tank of a washer is located in a motor compartment near a tank of the hydraulic booster of a steering.
1. For replenishment open a tank cover...
2.... also add liquid to level of his mouth then close a tank cover.
3. At a contamination of a jet of a washer clean it a sewing needle. It it is possible to adjust and the direction of a stream of washing liquid.

Prevention
To pro-cleaning and adjustment of a jet apply only not tempered needles or pins. The broken-off tip of the tempered needle to remove from an opening of a jet it is impossible.

«previous page
4.2.5. Check of level and a dolivka of working liquid in a tank of the hydraulic booster of a steering
following page»
4.2.7. Check of external lighting devices