6.3.3. Removal and installation of drives of forward wheels

Drives of forward wheels remove for their replacement at damage or for replacement of hinges and their covers. Besides, drives of forward wheels happens it is necessary to remove for receiving access to other units.

Note External and internal hinges of both drives have an identical design therefore the left and right drives remove the same receptions. Work is shown on an example of the left drive.

It be required to you: all tools for a detachment of a spherical support from the lever of a forward suspension bracket (see. «Replacement of the lever of a forward suspension bracket»), steering draft from the rotary lever (see. «Replacement of an external tip of steering draft»), and also a face head «on 30», TORX M8 key, a key for bolts of wheels.

1. Weaken an inhaling of a nut of a nave and bolts of fastening of a wheel.

Prevention At an otvorachivaniye of a nut of a nave the car should stand on the earth! Weaken and tighten bolts of fastening of wheels only on the car standing on the earth.

2. Brake the car the parking brake, establish persistent whetstones under back wheels and raise a forward part of the car, having established reliable support. Remove a forward wheel.

3. Finally unscrew a nave nut...

Prevention Do not use a nut of naves repeatedly.

4.... also remove a persistent washer.	5. Disconnect from the rotary lever the left steering draft (see. «Replacement of an external tip of steering draft»).

6. Turn out three bolts of fastening of a spherical support to the suspension bracket lever...	7.... also remove a mortgage plate of its fastening with privarny nuts.

8. Turn out six bolts of fastening of the case of the internal hinge to a semi-axis flange...	9.... take bolts from case openings, remove three lock plates established under them...

Note Lock plates of bolts of fastening of internal hinges at each dismantling of connection replace new.

10.... also disconnect the internal hinge from a semi-axis.	11. Take an amortizatorny rack aside a little, at the same time taking out from a nave a shaft of the external hinge of equal angular speeds...

Good advice If it is not possible to take a hinge shaft effort of hands, beat out it from a nave in easy blows of a hammer through a pro-rate made of soft metal or a tree.

12.... also remove a drive.

13. Establish a drive of the left forward wheel and all removed details in sequence, return to removal.

14. Establish a wheel and wrap bolts of fastening of a wheel against the stop, without tightening them it is final.

15. Establish the car on wheels, having removed it from support, and tighten a nave nut.

Prevention Nave nut finally tighten on the car standing on the earth. The moment of an inhaling of a nut of 280 N · m (28 kgfs · м). To move the car at not tightened nut of a nave it is strictly forbidden in order to avoid damage of a separator of the bearing of a nave.

16. Tighten bolts of fastening of a wheel (see. «Wheel replacement»).