Chery Amulet since 2006
1. Car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
8.1. Features of a design
8.2. Possible malfunctions of a steering with the hydraulic booster, their reasons and ways of elimination
8.3. Steering column
8.3.1. Removal and installation of a steering wheel
8.3.2. Removal and installation of a casing of a steering column
8.3.3. Removal and installation of a steering column
8.3.4. Replacement of a shaft of a steering and intermediate shaft
8.4. Steering drafts
8.5. Steering mechanism
9. Brake system
10. Electric equipment
11. Body
12. Appendices
13. Electric equipment schemes
 






8c4a8411




8-3-2-snyatie-i-ustanovka-kozhukha-rulevojj-kolonki.html

8.3.2. Removal and installation of a casing of a steering column

You will need a screw-driver with a crosswise edge.
1. Remove a steering wheel (see. «Removal and installation of a steering wheel»).

Note
Need of removal of a steering wheel speaks that access to two screws of fastening of a casing the helmsman of a column is closed by wheel facing.

2. From below a steering column turn out three screws which are pulling together among themselves parts of a casing.
3. Turn out two screws of fastening of the lower part of a casing to a connector of podrulevy switches...
4.... also remove the bottom...
5.... and top parts of a casing of a steering column.
6. Establish details as it should be, the return to removal.

«previous page
8.3.1. Removal and installation of a steering wheel
following page»
8.3.3. Removal and installation of a steering column