Removal and installation of protection of a case of the engine. Chery Amulet (since 2006 of release)
Chery Amulet since 2006
1. Car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance
5. Engine
5.1. Features of a design
5.2. Possible malfunctions of the engine, their reason and ways of elimination
5.3. Compression check in cylinders
5.4. Removal and installation of protection of a case of the engine
5.5. Replacement of support of a suspension bracket of the power unit
5.6. Installation of the piston of the first cylinder in the provision VMT of a step of compression
5.7. Removal, defektovka and flywheel installation
5.8. Replacement of details of consolidation of the engine
5.9. Head of the block of cylinders
5.10. Removal and engine installation
5.11. Engine repair
5.12. Greasing system
5.13. Cooling system
5.14. Power supply system
5.15. Catching system паров fuels
5.16. Cистема of production of the fulfilled gases
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Appendices
13. Electric equipment schemes
 










5-4-snyatie-i-ustanovka-zashhity-kartera-dvigatelya.html

5.4. Removal and installation of protection of a case of the engine

It be required to you: two keys «on 13», a face key «on 17».
1. Unscrew two nuts of hairpins of forward fastening of protection of a case...
2.... and, holding from a provorachivaniye bolts of back fastening of protection of a case, unscrew their nuts...
3.... also remove protection of a case from the car.
4. Establish protection of a case as it should be, the return to removal.

«previous page
5.3. Compression check in cylinders
following page»
5.5. Replacement of support of a suspension bracket of the power unit