11.13. Removal and installation of facing of a tunnel of a floor

Facing of a tunnel of a floor consists of two parts: forward and back.

You will need a screw-driver with a crosswise edge.

1. Take the back ashtray established in an end face of back facing of a tunnel of a floor between forward seats.

2. Turn out one screw of fastening of a back part of facing of a tunnel of a floor.	3. Remove a cover of the lever of the parking brake from back facing of a tunnel of a floor...

4.... and, having pulled for the lever handle, remove it assembled with a cover.	5. Lift up the lever of the parking brake, shift a little back part of facing back, deducing it from gearing with a forward part...

6.... also remove it, having moved up and forward on the lever of the parking brake.	7. Turn out two screws of fastening of a forward part of facing of a tunnel of a floor to the dashboard console.

8. Having hooked a screw-driver an overlay of the control unit system of heating (conditioning) and salon ventilation...	9.... remove a slip.

10. Unscrew the control lever handle a transmission and remove it.

11. Take from a forward part of facing of a tunnel of a floor a frame of a cover of a control lever a transmission, overcoming effort of its clamps.

12. Remove a forward part of facing of a tunnel of a floor, overcoming elastic resistance of the holders located from the back party.

13. Establish details of facing of a tunnel of a floor as it should be, the return to removal.