Replacement of the right back support of a suspension bracket of the power unit. Chery Amulet (since 2006 of release)
Chery Amulet since 2006
1. Car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance
5. Engine
5.1. Features of a design
5.2. Possible malfunctions of the engine, their reason and ways of elimination
5.3. Compression check in cylinders
5.4. Removal and installation of protection of a case of the engine
5.5. Replacement of support of a suspension bracket of the power unit
5.5.1. Replacement of a forward support of a suspension bracket of the power unit
5.5.2. Replacement of the right back support of a suspension bracket of the power unit
5.5.3. Replacement of the left back support of a suspension bracket of the power unit
5.6. Installation of the piston of the first cylinder in the provision VMT of a step of compression
5.7. Removal, defektovka and flywheel installation
5.8. Replacement of details of consolidation of the engine
5.9. Head of the block of cylinders
5.10. Removal and engine installation
5.11. Engine repair
5.12. Greasing system
5.13. Cooling system
5.14. Power supply system
5.15. Catching system паров fuels
5.16. Cистема of production of the fulfilled gases
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Appendices
13. Electric equipment schemes
 










5-5-2-zamena-pravojj-zadnejj-opory-podveski-silovogo-agregata.html

5.5.2. Replacement of the right back support of a suspension bracket of the power unit

It be required to you: keys «on 10», «on 13».
1. Substitute through a rubber or wooden pro-rate a support under a transmission.
2. Turn out three bolts of fastening of an arm to a support.
3. Turn out bolts of the right...
4.... and left support fastenings to a cross-piece...
5.... and, having a little raised the power unit, remove a support from the car.

Note
So the right back support of a suspension bracket of the power unit removed from the car looks.

6. Establish a support of the power unit as it should be, the return to removal.

«previous page
5.5.1. Replacement of a forward support of a suspension bracket of the power unit
following page»
5.5.3. Replacement of the left back support of a suspension bracket of the power unit