Chery Amulet since 2006
1. Car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance
5. Engine
5.1. Features of a design
5.2. Possible malfunctions of the engine, their reason and ways of elimination
5.3. Compression check in cylinders
5.4. Removal and installation of protection of a case of the engine
5.5. Replacement of support of a suspension bracket of the power unit
5.5.1. Replacement of a forward support of a suspension bracket of the power unit
5.5.2. Replacement of the right back support of a suspension bracket of the power unit
5.5.3. Replacement of the left back support of a suspension bracket of the power unit
5.6. Installation of the piston of the first cylinder in the provision VMT of a step of compression
5.7. Removal, defektovka and flywheel installation
5.8. Replacement of details of consolidation of the engine
5.9. Head of the block of cylinders
5.10. Removal and engine installation
5.11. Engine repair
5.12. Greasing system
5.13. Cooling system
5.14. Power supply system
5.15. Catching system паров fuels
5.16. Cистема of production of the fulfilled gases
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Appendices
13. Electric equipment schemes
 






8c4a8411




5-5-3-zamena-levojj-zadnejj-opory-podveski-silovogo-agregata.html

5.5.3. Replacement of the left back support of a suspension bracket of the power unit

It be required to you: keys «on 10», «on 13».
1. Turn out a bolt of fastening of an arm of a transmission to a support.
2. Turn out three bolts of fastening of an arm to a transmission and remove an arm.
3. Turn out two bolts of fastening of a support to a stretcher...
4.... also remove a support.

Note
So the left back support of a suspension bracket of the power unit removed from the car looks.

5. Establish the left back support of a suspension bracket of the power unit and all earlier removed details upside-down.

«previous page
5.5.2. Replacement of the right back support of a suspension bracket of the power unit
following page»
5.6. Installation of the piston of the first cylinder in the provision VMT of a step of compression