|
10-13-2-snyatie-i-ustanovka-ehlektrodvigatelejj-ventilyatorov-sistemy-okhlazhdeniya-dvigatelya.html
10.13.2. Removal and installation of electric motors of fans of system of cooling of the engineIt be required to you: a key «on 8», a face key «on 10», a screw-driver with a flat edge.
1. Remove electrofans with a casing (see. «Removal and installation of electrofans of a radiator of system of cooling of the engine»).
|
|
|
|
2. A face key «on 10» unscrew three nuts of fastening of the electric motor to a casing.
|
3. Weaken an inhaling of the holder of additional resistance and take out resistance from the holder.
|
|
|
|
|
4. Separate holders of wires.
|
5. Take wires from protective гофры.
|
|
|
|
|
6. Take out a block of a plait of wires of the electric motor from the holder.
|
7. Remove the electric motor assembled with a krylchatka from a casing.
|
|
|
|
|
8. A key «on 8» unscrew a nut of fastening of a krylchatka to an electric motor shaft...
|
9.... also remove a krylchatka.
|
10. Disconnect additional resistance.
11. Establish details as it should be, the return to removal.
|
Note
The electric motor of the second electrofan acts in film similarly.
|
| 