Chery Amulet since 2006
1. Car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
10.1. Features of a design
10.2. Diagnostics of malfunctions of electric equipment
10.3. Assembly blocks
10.4. Storage battery
10.5. Generator
10.6. Starter
10.7. Switch (lock) of ignition
10.8. Electronic control system of the engine (ESUD)
10.9. Ignition system
10.10. Lighting, light and sound alarm system
10.11. Windscreen cleaner
10.12. Windscreen washer
10.13. Electrofans of system of cooling of the engine
10.14. Electric motor of the fan of system of heating (conditioning) and salon ventilation
10.15. Heating system of back glass
10.16. Removal and installation of the boss of the lighter
10.17. Combination of devices
10.18. Replacement of switches of the dashboard
10.19. Automobile audiosystem
10.19.1. Removal and installation of loudspeakers of the speaker system
10.20. Replacement of sensors and switches
11. Body
12. Appendices
13. Electric equipment schemes
 






8c4a8411




10-19-1-snyatie-i-ustanovka-dinamikov-akusticheskojj-sistemy.html

10.19.1. Removal and installation of loudspeakers of the speaker system

On the car six loudspeakers of the speaker system are established: on one in forward doors, support of the shelf of a luggage carrier and two high-frequency in the dashboard.
It be required to you: screw-drivers with a flat and crosswise edge, a key «on 6».
1. Disconnect a wire from the minus plug of the storage battery.
2. Having hooked a screw-driver...
3.... remove a protective lattice.
4. Turn out four screws of fastening...
5.... also deduce the loudspeaker from a nest of the panel of a door.
6. Press a clamp...
7.... also disconnect a block of a plait of wires from the socket of loudspeaker of a forward door.
8. Press a clamp...
9.... also disconnect a block of a plait of wires from the socket of loudspeaker of a support of the back shelf.
10. Unscrew four nuts of fastening of loudspeaker to a support of the shelf of a luggage carrier...
11.... also remove the loudspeaker.
12. Press a clamp...
13.... also disconnect a block of a plait of wires from the socket of the high-frequency loudspeaker.
14. Having hooked a screw-driver...
15.... remove a protective lattice of loudspeaker.
16. Turn the loudspeaker before combination of clamps with cuts in a nest and take the loudspeaker from a dashboard nest.
17. Establish details as it should be, the return to removal.

«previous page
10.19. Automobile audiosystem
following page»
10.20. Replacement of sensors and switches