Removal and installation of facings of salon. Chery Amulet (since 2006 of release)
Chery Amulet since 2006
1. Car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
11.1. Features of a design
11.2. Possible malfunctions of a body, their reason and ways of elimination
11.3. Removal and installation of facing of a radiator
11.4. Removal, dismantling and installation of bumpers
11.5. Removal and installation of mudguards of wheels and podkrylok
11.6. Removal and installation of a forward wing
11.7. Removal and installation of a lattice and facing of a box of airinflow
11.8. Cowl
11.9. Lateral doors
11.10. Back door
11.11. Removal and installation of a cover of the hatch of a bulk pipe of a fuel tank
11.12. Seats
11.13. Removal and installation of facing of a tunnel of a floor
11.14. System of passive safety (SRS)
11.15. Removal and installation of external rear-view mirrors
11.16. Removal and installation of casings of a steering column
11.17. Dashboard
11.18. Heater and conditioner
11.19. Salon fittings
11.19.1. Replacement of hand-rail
11.19.2. Replacement of antisolar peaks
11.19.3. Removal and installation of facings of salon
11.19.4. Removal and installation of facings of a luggage carrier
11.20. Screen wiper of a wind window
11.21. Replacement of a motionless glazing of a body
11.22. Care of a body
12. Appendices
13. Electric equipment schemes
 










11-19-3-snyatie-i-ustanovka-oblicovok-salona.html

11.19.3. Removal and installation of facings of salon

It be required to you: screw-drivers with flat and crosswise edges.

Note
Removal and installation of facings on the left side of salon are shown. Facings on the right side remove similarly.

1. For removal of facing of a forward rack execute the following operations.
2. Having hooked a screw-driver, remove a cap...
3.... turn out the screw of the top fastening...
4.... also remove facing of a forward rack, deducing it the bottom holder from gearing.
5. For removal of facing of a forward threshold pull it up and, overcoming elastic resistance of plastic holders, remove facing.
6. Examine the facing fastening, the broken holders replace.
7. Similarly remove facing of a back threshold.
8. Before removal of facings of the central rack turn out the top bolt of fastening of a seat belt.
9. Hook a screw-driver...
10.... also remove the bottom and top decorative caps.
11. Turn out on one screw from the bottom...
12.... and top party of fastening of the top part of facing of the central rack...
13.... also remove facing.
14. Turn out two bottom...
15.... and two top screws of fastening of the lower part of facing of the central rack...
16.... deduce a seat belt and remove facing.
17. Before removal of facings of a back rack turn out the top bolt of fastening and remove the top fastening of a seat belt.
18. Hook a screw-driver and take caps...
19.... turn out two screws of fastening...
20.... also remove facing of a back rack.
21. Establish facings of salon and all removed details upside-down.

«previous page
11.19.2. Replacement of antisolar peaks
following page»
11.19.4. Removal and installation of facings of a luggage carrier