Repair of the mechanism of gear shifting. Chery Amulet (since 2006 of release)
Chery Amulet since 2006
1. Car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance
5. Engine
6. Transmission
6.1. Coupling
6.2. Transmission
6.2.1. Features of a design
6.2.2. Possible malfunctions of a transmission, their reason and ways of elimination
6.2.3. Replacement of epiploons of a transmission
6.2.4. Removal and transmission installation
6.2.5. Dismantling and assembly of a transmission and defektovka of its details
6.2.6. Repair of a secondary shaft
6.2.7. Repair of primary shaft
6.2.8. Synchronizer repair
6.2.9. Differential repair
6.2.10. Repair of the mechanism of gear shifting
6.2.11. Repair of hinges of a drive of gear shifting
6.2.12. Removal, installation and repair of the coulisse of a control lever by a transmission
6.2.13. Adjustment of a drive of management by a transmission
6.3. Drives of forward wheels
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Appendices
13. Electric equipment schemes
 






8c4a8411



6-2-10-remont-mekhanizma-pereklyucheniya-peredach.html

6.2.10. Repair of the mechanism of gear shifting

The mechanism of gear shifting consists from established in a case of a transmission of forks of inclusion of transfers, their leads and a rod, and also of a lead of the mechanism of the gear shifting established in inflow of this case. Removal, installation and a defektovka of the details mounted in a case, are described in the course of transmission dismantling (see. «Dismantling and assembly of a transmission and defektovka of its details»). Repair of a lead of the mechanism of gear shifting is described in this subsection.
You will need a stripper of lock rings.
1. Dissolve the ends of a lock ring of fastening of cups of a press spring...
2.... and, holding the top cup, remove a ring.
3. Remove the top cup...
4.... spring...
5.... and bottom cup.
6. Remove a lock ring of fastening of the carriage, having dissolved its ends.
7. Remove from a lead rod the carriage assembled with the switch...
8.... also take from the carriage the switch.
9. Examine details of a lead of the mechanism of gear shifting. Replace strongly pressed out spring, deformed or having damages of shliyets and a carving a rod, the carriage and the switch with the openings increased owing to wear.
10. Collect a lead of the mechanism of gear shifting as it should be, the return to dismantling.

«previous page
6.2.9. Differential repair
following page»
6.2.11. Repair of hinges of a drive of gear shifting