Removal and installation of an amortizatorny rack of a forward suspension bracket. Chery Amulet (since 2006 of release)
Chery Amulet since 2006
1. Car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
7.1. Forward suspension bracket
7.1.1. Features of a design
7.1.2. Possible malfunctions of a forward suspension bracket, their reason and ways of elimination
7.1.3. Removal and installation of an amortizatorny rack of a forward suspension bracket
7.1.4. Repair of an amortizatorny rack of a forward suspension bracket
7.1.5. Replacement of the top support of an amortizatorny rack
7.1.6. Replacement of a spherical support
7.1.7. Removal and installation of a cross-piece of a forward suspension bracket
7.1.8. Replacement of the lever of a forward suspension bracket
7.1.9. Replacement of details of the stabilizer of cross-section stability of a forward suspension bracket
7.1.10. Removal and installation of a rotary fist
7.1.11. Replacement of the bearing of a forward nave
7.2. Back suspension bracket
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Appendices
13. Electric equipment schemes
 










7-1-3-snyatie-i-ustanovka-amortizatornojj-stojjki-perednejj-podveski.html

7.1.3. Removal and installation of an amortizatorny rack of a forward suspension bracket

It be required to you: a face head «on 22», a key-shestigrannik «on 7», keys «on 18», «on 19», an alligator wrench.
1. Brake the car the parking brake and establish a protivootkatny emphasis ("boots") under back wheels.
2. Remove a wheel.
3. Disconnect from arms on an amortizatorny rack holders of a brake hose...
4.... and plait of wires of the sensor of frequency of rotation of a wheel.
5. Remove a protective cap of a pillow of fastening of an amortizatorny rack to a body.
6. Unscrew a nut of fastening of a rack, holding its rod from a provorachivaniye a key-shestigrannikom passed in an opening of a face head which, in turn, rotate an alligator wrench.
7. Remove a pillow of fastening of a rack.
8. Unscrew nuts of two bolts of fastening of an amortizatorny rack to a rotary fist, take bolts from rack and fist openings...

Note
Before dismantling of connection of an amortizatorny rack and a rotary fist mark in any way (for example, paint) the mutual provision of a rack and a fist that at assembly to establish them in former situation, without having broken a corner of a cross-section inclination of an axis of turn of a wheel.

9.... also remove an amortizatorny rack.
10. Establish details as it should be, the return to removal.

Note
After replacement of an amortizatorny rack of a forward suspension bracket or its details check and if necessary adjust corners of installation of wheels (see. «Check and adjustment of corners of installation of wheels»). Use services of the workshops having the special equipment.

«previous page
7.1.2. Possible malfunctions of a forward suspension bracket, their reason and ways of elimination
following page»
7.1.4. Repair of an amortizatorny rack of a forward suspension bracket