|
10-11-3-snyatie-razborka-i-ustanovka-ochistitelya-vetrovogo-stekla.html
10.11.3. Removal, dismantling and installation of a cleaner of a windscreenIt be required to you: a key «on 10», a face head «on 13», a screw-driver.
1. Disconnect a wire from the minus plug of the storage battery.
|
|
|
|
2. Hook a screw-driver decorative caps of nuts of levers of brushes of a screen wiper...
|
3.... also remove caps.
|
|
|
|
|
4. A face head «on 13» unscrew nuts of fastening of levers.
|
5. Having hooked a screw-driver, shift levers from shliyets...
|
6.... also remove levers together with brushes.
|
|
|
|
8. Wring out a clamp and disconnect a block of a plait of wires from the socket of a motor-reducer of a screen wiper.
|
9. A key «on 10» turn out three bolts of fastening of a screen wiper to a body...
|
|
|
|
|
10.... also remove a screen wiper.
|
11. Hook a screw-driver and remove drafts of a screen wiper from spherical hinges of cranks.
|
|
|
|
|
12. A key «on 10» unscrew a fastening nut...
|
13.... and, having remembered situation in which the crank is established on a motor-reducer shaft, remove a crank from a shaft.
|
|
|
|
|
14. A key «on 10» turn out three bolts of fastening of a motor-reducer...
|
15.... also remove a motor-reducer from a screen wiper arm.
|
|
Note
So the motor-reducer of the screen wiper which has been removed from an arm of fastening looks.
|
16. Put new konsistentny greasing in hinges of a trapeze of a screen wiper.
17. Collect and establish a screen wiper as it should be, the return to removal.
| 