Removal and installation of a tank of a washer of a windscreen. Chery Amulet (since 2006 of release)
Chery Amulet since 2006
1. Car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
10.1. Features of a design
10.2. Diagnostics of malfunctions of electric equipment
10.3. Assembly blocks
10.4. Storage battery
10.5. Generator
10.6. Starter
10.7. Switch (lock) of ignition
10.8. Electronic control system of the engine (ESUD)
10.9. Ignition system
10.10. Lighting, light and sound alarm system
10.11. Windscreen cleaner
10.12. Windscreen washer
10.12.1. Removal and installation of a tank of a washer of a windscreen
10.12.2. Check and replacement of the pump of a washer
10.13. Electrofans of system of cooling of the engine
10.14. Electric motor of the fan of system of heating (conditioning) and salon ventilation
10.15. Heating system of back glass
10.16. Removal and installation of the boss of the lighter
10.17. Combination of devices
10.18. Replacement of switches of the dashboard
10.19. Automobile audiosystem
10.20. Replacement of sensors and switches
11. Body
12. Appendices
13. Electric equipment schemes
 






8c4a8411



10-12-1-snyatie-i-ustanovka-bachka-omyvatelya-vetrovogo-stekla.html

10.12.1. Removal and installation of a tank of a washer of a windscreen

You will need a face key «on 10».
1. Disconnect a wire from the minus plug of the storage battery.
2. Take a tank of the hydraulic booster of a steering aside (see. «Replacement of a tank of the hydraulic booster of the steering mechanism») to get access to a nut of fastening of a tank of a washer.
3. Turn out a nut of fastening of a tank of a washer.
4. Remove a tank from an arm.
5. Disconnect a block of a plait of wires from the washer pump.
6. Merge from a tank washing liquid if it in it is.
7. Accurately take out the washer pump from the sealing plug of a tank.
8. Hook a screw-driver...
9.... also take out from a tank opening the sealing plug.

Note
Strongly hardened or torn plug replace new.

10. Establish details as it should be, the return to removal.

Note
At installation at first insert the plug into a tank opening, and then establish the pump.

«previous page
10.12. Windscreen washer
following page»
10.12.2. Check and replacement of the pump of a washer