Chery Amulet since 2006
1. Car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
10.1. Features of a design
10.2. Diagnostics of malfunctions of electric equipment
10.3. Assembly blocks
10.4. Storage battery
10.5. Generator
10.5.1. Features of a design
10.5.2. Possible malfunctions of the generator, their reason and ways of elimination
10.5.3. Removal and generator installation
10.5.4. Generator repair
10.6. Starter
10.7. Switch (lock) of ignition
10.8. Electronic control system of the engine (ESUD)
10.9. Ignition system
10.10. Lighting, light and sound alarm system
10.11. Windscreen cleaner
10.12. Windscreen washer
10.13. Electrofans of system of cooling of the engine
10.14. Electric motor of the fan of system of heating (conditioning) and salon ventilation
10.15. Heating system of back glass
10.16. Removal and installation of the boss of the lighter
10.17. Combination of devices
10.18. Replacement of switches of the dashboard
10.19. Automobile audiosystem
10.20. Replacement of sensors and switches
11. Body
12. Appendices
13. Electric equipment schemes
 






8c4a8411




10-5-3-snyatie-i-ustanovka-generatora.html

10.5.3. Removal and generator installation

It be required to you: keys «on 8», «on 10», «on 13».
1. Disconnect a wire from the minus plug of the storage battery.
2. Remove a belt of a drive of the generator and the conditioner compressor from a generator pulley (see. «Replacement of a belt of a drive of the generator and conditioner compressor»).
3. Remove a cap from a conclusion nut «B +» the generator.
4. A key «on 13» unscrew a nut of fastening of a tip of a wire to a conclusion «B +» the generator...
5.... also remove a wire tip.
6. A key «on 8» unscrew a nut of fastening of a tip of a wire to a conclusion «D +» the generator...
7.... also remove a wire tip.
8. A key «on 10» turn out two bolts of fastening of the generator to an engine arm...
9.... also remove the generator from the car.
10. Establish the generator as it should be, the return to removal.
11. Establish into place a belt of a drive of the generator and the conditioner compressor.

«previous page
10.5.2. Possible malfunctions of the generator, their reason and ways of elimination
following page»
10.5.4. Generator repair