Removal and starter installation. Chery Amulet (since 2006 of release)
Chery Amulet since 2006
1. Car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
10.1. Features of a design
10.2. Diagnostics of malfunctions of electric equipment
10.3. Assembly blocks
10.4. Storage battery
10.5. Generator
10.6. Starter
10.6.1. Features of a design
10.6.2. Possible malfunctions of a starter, their reason and ways of elimination
10.6.3. Removal and starter installation
10.6.4. Starter repair
10.7. Switch (lock) of ignition
10.8. Electronic control system of the engine (ESUD)
10.9. Ignition system
10.10. Lighting, light and sound alarm system
10.11. Windscreen cleaner
10.12. Windscreen washer
10.13. Electrofans of system of cooling of the engine
10.14. Electric motor of the fan of system of heating (conditioning) and salon ventilation
10.15. Heating system of back glass
10.16. Removal and installation of the boss of the lighter
10.17. Combination of devices
10.18. Replacement of switches of the dashboard
10.19. Automobile audiosystem
10.20. Replacement of sensors and switches
11. Body
12. Appendices
13. Electric equipment schemes
 










10-6-3-snyatie-i-ustanovka-startera.html

10.6.3. Removal and starter installation

The starter is established on a coupling case from the forward party of the power unit.
It be required to you: keys «on 13», «on 16».
1. Wring out a clamp....
2.... also disconnect a block of an operating wire from the traction relay.
3. Remove a cap from a nut of fastening of a power wire.
4. A key «on 13» unscrew a nut of fastening of a power wire...
5.... also remove a wire from a contact bolt of the traction relay.
6. A key «on 13» unscrew a nut of fastening of a "mass" wire...
7.... also remove a wire from a hairpin.
8. A key «on 16» turn out two bolts and a key «on 13» unscrew a nut of fastening of a starter...
9.... also remove a starter.
10. Establish a starter as it should be, the return to removal.

«previous page
10.6.2. Possible malfunctions of a starter, their reason and ways of elimination
following page»
10.6.4. Starter repair