Chery Amulet since 2006
1. Car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
10.1. Features of a design
10.2. Diagnostics of malfunctions of electric equipment
10.3. Assembly blocks
10.4. Storage battery
10.5. Generator
10.6. Starter
10.7. Switch (lock) of ignition
10.8. Electronic control system of the engine (ESUD)
10.9. Ignition system
10.9.1. Features of the device
10.9.2. Removal and installation of the coil of ignition
10.9.3. Check of the coil of ignition
10.10. Lighting, light and sound alarm system
10.11. Windscreen cleaner
10.12. Windscreen washer
10.13. Electrofans of system of cooling of the engine
10.14. Electric motor of the fan of system of heating (conditioning) and salon ventilation
10.15. Heating system of back glass
10.16. Removal and installation of the boss of the lighter
10.17. Combination of devices
10.18. Replacement of switches of the dashboard
10.19. Automobile audiosystem
10.20. Replacement of sensors and switches
11. Body
12. Appendices
13. Electric equipment schemes
 






8c4a8411 Спа программа для двоих смотрите на http://www.spa-barroko.ru.




10-9-3-proverka-katushki-zazhiganiya.html

10.9.3. Check of the coil of ignition

You will need a tester.
1. Remove the ignition coil from the car (see. «Removal and installation of the coil of ignition»).
2. Measure resistance of secondary windings of the coil of ignition, having connected tester conclusions to the first and the fourth, and then to the second and third high-voltage conclusions. Resistance of secondary windings at 21–27 °C should make about 11,5-13,5 kiloohms.
3. If resistance at least one secondary winding strongly differs from the specified value, replace the ignition coil.
4. Measure resistance of primary windings of the coil of ignition, having connected tester conclusions to the first and the second, and then to the second and third conclusions. Resistance of secondary windings at 21–27 °C should make about 0,51-0,61 Ohm.
5. If resistance at least one primary winding strongly differs from the specified value, replace the ignition coil.

«previous page
10.9.2. Removal and installation of the coil of ignition
following page»
10.10. Lighting, light and sound alarm system