|
11-10-3-zamena-zamka-i-vyklyuchatelya-zamka-dveri-zadka.html
11.10.3. Replacement of the lock and switch of the lock of a door of a backDoor of a back of Chery Amulet cars equip with two locks located on each side to a door.
It be required to you: a face key «on 8», a screw-driver with a crosswise edge.
|
Note
Removal of the lock of a door of a back is shown on an example of the left lock, replacement of the right is carried out similarly.
|
|
|
|
|
2. Disconnect draft of the lock of a door of a back from the lever of a drive of opening.
|
3. Turn out two screws of fastening...
|
|
|
|
|
4.... take away the lock of a door of a back...
|
5.... disconnect draft and remove the lock of a door of a back from the car.
|
6. Separate a block of the electric drive of blocking of the lock of a door of a back.
|
|
|
|
7. Turn out two screws of fastening...
|
8.... wring out a clamp in the switch of the lock of a door of a back...
|
|
|
|
|
9.... deduce draft from the switch...
|
10.... also remove the electric drive of the switch of the lock of a door of a back.
|
11. Disconnect draft of a drive of levers of unlocking of locks of a door of a back from the switch of locks.
12. Turn out two nuts of fastening of a decorative clamping slip.
|
|
|
|
13. Remove a slip...
|
14.... also remove from hairpins the switch of locks of a door of a back.
|
|
|
|
|
15. For removal of a latch of the lock of a door of a back turn out two screws of its fastening...
|
16.... also remove a latch.
|
17. Establish all removed details as it should be, the return to removal.
18. If the zakhlopyvaniye of a door of a back is accompanied by blow of the lever of the lock about a latch, adjust the provision of a latch. For this purpose weaken two screws of fastening of a latch and, moving a latch in the cross-section or longitudinal direction, achieve an unaccented zakhlopyvaniye of a door. After that tighten screws of fastening of a latch.
| 