Removal and installation of a door of a back. Chery Amulet (since 2006 of release)
Chery Amulet since 2006
1. Car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
11.1. Features of a design
11.2. Possible malfunctions of a body, their reason and ways of elimination
11.3. Removal and installation of facing of a radiator
11.4. Removal, dismantling and installation of bumpers
11.5. Removal and installation of mudguards of wheels and podkrylok
11.6. Removal and installation of a forward wing
11.7. Removal and installation of a lattice and facing of a box of airinflow
11.8. Cowl
11.9. Lateral doors
11.10. Back door
11.10.1. Replacement of an emphasis of a door of a back
11.10.2. Removal and installation of an upholstery of a door of a back
11.10.3. Replacement of the lock and switch of the lock of a door of a back
11.10.4. Removal and installation of a door of a back
11.11. Removal and installation of a cover of the hatch of a bulk pipe of a fuel tank
11.12. Seats
11.13. Removal and installation of facing of a tunnel of a floor
11.14. System of passive safety (SRS)
11.15. Removal and installation of external rear-view mirrors
11.16. Removal and installation of casings of a steering column
11.17. Dashboard
11.18. Heater and conditioner
11.19. Salon fittings
11.20. Screen wiper of a wind window
11.21. Replacement of a motionless glazing of a body
11.22. Care of a body
12. Appendices
13. Electric equipment schemes
 










11-10-4-snyatie-i-ustanovka-dveri-zadka.html

11.10.4. Removal and installation of a door of a back

You will need a face head «on 13».

Good advice
Back door quite bulky therefore remove and establish it with the assistant.

1. Remove an upholstery of a door of a back (see. «Removal and installation of an upholstery of a door of a back»).
2. Remove a luggage carrier upholstery (see. «Removal and installation of facings and luggage carrier upholsteries»).
3. Compress a clamp and separate a block of a plait of wires of a door of a back.
4. Disconnect the holder of a plait of wires and take a plait of wires from an opening in a body.
5. Disconnect a plait of wires from the holder on a loop of a door of a back.
6. Similarly take a plait of wires on the right side.
7. Turn out on two bolts from each party of fastening of a door of a back and remove it.
8. In need of removal of loops of fastening of a door of a back turn out two bolts and remove the left loop, the right loop of fastening of a door of a back acts in film similarly.


Good advice
If you remove a back door not for replacement, we recommend to mark the provision of loops (for example, lead round them on a contour a felt-tip pen).

9. Establish a back door as it should be, the return to removal.

«previous page
11.10.3. Replacement of the lock and switch of the lock of a door of a back
following page»
11.11. Removal and installation of a cover of the hatch of a bulk pipe of a fuel tank