Replacement of pillows of a suspension bracket of system of production of the fulfilled gases. Chery Amulet (since 2006 of release)
Chery Amulet since 2006
1. Car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance
5. Engine
5.1. Features of a design
5.2. Possible malfunctions of the engine, their reason and ways of elimination
5.3. Compression check in cylinders
5.4. Removal and installation of protection of a case of the engine
5.5. Replacement of support of a suspension bracket of the power unit
5.6. Installation of the piston of the first cylinder in the provision VMT of a step of compression
5.7. Removal, defektovka and flywheel installation
5.8. Replacement of details of consolidation of the engine
5.9. Head of the block of cylinders
5.10. Removal and engine installation
5.11. Engine repair
5.12. Greasing system
5.13. Cooling system
5.14. Power supply system
5.15. Catching system паров fuels
5.16. Cистема of production of the fulfilled gases
5.16.1. Features of a design
5.16.2. Replacement of pillows of a suspension bracket of system of production of the fulfilled gases
5.16.3. Replacement of the main exhaust silencer
5.16.4. Replacement of the additional exhaust silencer
5.16.5. Replacement of converter of the fulfilled gases
5.16.6. Replacement of a reception pipe
5.16.7. Removal and installation of thermoscreens
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Appendices
13. Electric equipment schemes
 






8c4a8411



5-16-2-zamena-podushek-podveski-sistemy-vypuska-otrabotavshikh-gazov.html

5.16.2. Replacement of pillows of a suspension bracket of system of production of the fulfilled gases

Rubber pillows of a suspension bracket of system of production of the fulfilled gases replace in case because of their damage or excessive deformation elements of system start to knock, adjoining to a body or other units of the car.
You will need a screw-driver.
1. Establish the car on a viewing ditch or the lift.
2. For replacement of a pillow of a back suspension bracket of the main exhaust silencer by means of a screw-driver remove a pillow from a body arm...
3.... and from an arm of the main exhaust silencer.
4. With similar way replace a pillow of a suspension bracket of the main and additional exhaust silencers.
5. For replacement of pillows of an average suspension bracket of the main exhaust silencer raise the exhaust silencer and remove pillows from body arms...
6.... and from exhaust silencer arms.
7. For replacement of pillows of a suspension bracket of a reception pipe by means of a screw-driver remove pillows from an arm of a reception pipe, and then from stretcher arms.

Good advice
In case of need damaged pillows can be cut off simply.

8. Establish new pillows as it should be, the return to removal.

Good advice
For simplification of installation of pillows moisten arms with soap solution.

«previous page
5.16.1. Features of a design
following page»
5.16.3. Replacement of the main exhaust silencer