Chery Amulet since 2006
1. Car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
10.1. Features of a design
10.2. Diagnostics of malfunctions of electric equipment
10.3. Assembly blocks
10.4. Storage battery
10.5. Generator
10.6. Starter
10.7. Switch (lock) of ignition
10.8. Electronic control system of the engine (ESUD)
10.9. Ignition system
10.10. Lighting, light and sound alarm system
10.11. Windscreen cleaner
10.12. Windscreen washer
10.13. Electrofans of system of cooling of the engine
10.14. Electric motor of the fan of system of heating (conditioning) and salon ventilation
10.14.1. Features of a design
10.14.2. Possible malfunctions of the electric motor of the fan of a heater, their reason and ways of elimination
10.14.3. Removal and installation of the electric motor of the fan of system of heating (conditioning) and salon ventilation
10.14.4. Replacement of the additional resistor of a heater
10.15. Heating system of back glass
10.16. Removal and installation of the boss of the lighter
10.17. Combination of devices
10.18. Replacement of switches of the dashboard
10.19. Automobile audiosystem
10.20. Replacement of sensors and switches
11. Body
12. Appendices
13. Electric equipment schemes
 






8c4a8411 erostopersex.com




10-14-3-snyatie-i-ustanovka-ehlektrodvigatelya-ventilyatora-sistemy-otopleniya-kondicionirovaniya.html

10.14.3. Removal and installation of the electric motor of the fan of system of heating (conditioning) and salon ventilation

It be required to you: screw-drivers with a flat and crosswise edge.
1. Disconnect a wire from the minus plug of the storage battery.
3. Lift up a clamp of a block of a plait of wires...
4.... also disconnect a block from the electric motor socket.
5. Deduce from holders plaits of wires.
6. Turn out three screws of fastening of the electric motor of the fan to the heater case...
7.... also take the electric motor from the case.

Notes
So the fan electric motor assembled with a krylchatka looks. At malfunction of the electric motor or a krylchatka all knot assembled as attempt of removal of a krylchatka from a shaft of the electric motor will lead to her breakage is subject to replacement.
Balancing of a krylchatka is carried out assembled with the electric motor industrially at specialized diagnostic stands by means of installation on the blade of the fan of balansirny brackets.

8. Establish the fan electric motor as it should be, the return to removal.

«previous page
10.14.2. Possible malfunctions of the electric motor of the fan of a heater, their reason and ways of elimination
following page»
10.14.4. Replacement of the additional resistor of a heater