Removal, dismantling and dashboard installation. Chery Amulet (since 2006 of release)
Chery Amulet since 2006
1. Car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
11.1. Features of a design
11.2. Possible malfunctions of a body, their reason and ways of elimination
11.3. Removal and installation of facing of a radiator
11.4. Removal, dismantling and installation of bumpers
11.5. Removal and installation of mudguards of wheels and podkrylok
11.6. Removal and installation of a forward wing
11.7. Removal and installation of a lattice and facing of a box of airinflow
11.8. Cowl
11.9. Lateral doors
11.10. Back door
11.11. Removal and installation of a cover of the hatch of a bulk pipe of a fuel tank
11.12. Seats
11.13. Removal and installation of facing of a tunnel of a floor
11.14. System of passive safety (SRS)
11.15. Removal and installation of external rear-view mirrors
11.16. Removal and installation of casings of a steering column
11.17. Dashboard
11.17.1. Features of a design
11.17.2. Removal, dismantling and dashboard installation
11.18. Heater and conditioner
11.19. Salon fittings
11.20. Screen wiper of a wind window
11.21. Replacement of a motionless glazing of a body
11.22. Care of a body
12. Appendices
13. Electric equipment schemes
 










11-17-2-snyatie-razborka-i-ustanovka-paneli-priborov.html

11.17.2. Removal, dismantling and dashboard installation

It be required to you: keys «on 8», «on 10», a screw-driver with a crosswise edge.
1. Disconnect a wire from the minus plug of the storage battery.
2. Remove a steering wheel (see. «Removal and installation of a steering wheel»).
3. Remove casings of a steering column (see. «Removal and installation of casings of a steering column»).
4. Remove a combination of devices (see. «Removal and installation of a combination of devices»).
5. Turn out screws of fastening of the shelf for the small things, located under a steering column...

Note
Screws of fastening of the shelf are so located.

6.... also remove the shelf.
7. Turn out two screws of fastening of the assembly block to a dashboard framework.
8. Turn out a bolt of fastening of a framework to a heater arm.
9. Turn out two screws of fastening of the internal panel to a dashboard framework.
10. Remove two decorative caps located on the left side of the dashboard...
11.... also turn out two bolts of lateral fastening of the dashboard to a body arm.
12. Similarly turn out two bolts on the right side of dashboard fastening.
13. Hook a screw-driver and deduce edge of the right deflector of a nozzle of the central supply of air...
14.... also take it.
15. Similarly take the left deflector of a nozzle of the central supply of air.
16. Turn out two screws of the top fastening of an overlay of the central console.
17. Take a radio tape recorder from the central console of the dashboard and disconnect from it blocks of plaits of wires and the aerial tip.
18. Hook a screw-driver and remove a coaster frame.
19. Turn out four screws of fastening of a coaster...
20.... also take it from the dashboard.
21. Turn out two screws of average fastening of an overlay of the central console.
22. Disconnect blocks of wires from conclusions of switches.
23. Turn out two screws of fastening of a forward part of facing of a tunnel of a floor to the console of the dashboard and remove facing of a tunnel of a floor (see. «Removal and installation of facing of a tunnel of a floor»).
24. Having hooked a screw-driver an overlay of the control unit system of heating (conditioning) and salon ventilation...
25.... remove a slip.
26. Turn out four screws of fastening of the control unit system of heating (conditioning) and salon ventilation to the panel and two screws of the bottom fastening of an overlay of the central console...
27.... also remove an overlay of the central console.
28. Turn out two screws of the bottom fastening of a ware box.
29. Open a ware box and turn out four screws of the top fastening of a frame to the dashboard.
30. Compress two clamps located on each side of a lamp of illumination of a ware box...
31.... take a lamp from a frame, disconnect from a lamp conclusion a block of a plait of wires and remove a ware box.
32. Remove a safety cushion of the forward passenger (see. «Removal and installation of a safety cushion of the forward passenger»).
33. Turn out a bolt of fastening of a framework of the dashboard to a heater arm.
34. Under a frame of a windscreen unscrew two nuts of fastening of the dashboard to a front board...
35.... also remove the dashboard.
36. Turn out six screws of fastening of an air line to a dashboard framework...

Note
Screws of fastening of an air line are so located to a dashboard framework.

37.... also remove an air line.
38. Hook a screw-driver and deduce one edge of the deflector of a nozzle of lateral supply of air on the left side of the dashboard...
39.... also take it.
40. Turn out the fastening screw...
41.... wring out two clamps...
42.... also take a nozzle of supply of air on the left side of the dashboard.
43. Similarly remove a nozzle on the right side.
44. Establish the dashboard and all removed details as it should be, the return to removal.

«previous page
11.17.1. Features of a design
following page»
11.18. Heater and conditioner