Chery Amulet since 2006
	1. Car device
	2. Recommendations about operation
	3. Malfunctions in a way
	4. Maintenance
	5. Engine
	6. Transmission
	7. Running gear
	8. Steering
	9. Brake system
	10. Electric equipment
		10.1. Features of a design
		10.2. Diagnostics of malfunctions of electric equipment
		10.3. Assembly blocks
		10.4. Storage battery
		10.5. Generator
		10.6. Starter
		10.7. Switch (lock) of ignition
		10.8. Electronic control system of the engine (ESUD)
		10.9. Ignition system
		10.10. Lighting, light and sound alarm system
		10.11. Windscreen cleaner
		10.12. Windscreen washer
		10.13. Electrofans of system of cooling of the engine
		10.14. Electric motor of the fan of system of heating (conditioning) and salon ventilation
			10.14.1. Features of a design
			10.14.2. Possible malfunctions of the electric motor of the fan of a heater, their reason and ways of elimination
			10.14.3. Removal and installation of the electric motor of the fan of system of heating (conditioning) and salon ventilation
			10.14.4. Replacement of the additional resistor of a heater
		10.15. Heating system of back glass
		10.16. Removal and installation of the boss of the lighter
		10.17. Combination of devices
		10.18. Replacement of switches of the dashboard
		10.19. Automobile audiosystem
		10.20. Replacement of sensors and switches
	11. Body
	12. Appendices
	13. Electric equipment schemes

10-14-4-zamena-dopolnitelnogo-rezistora-otopitelya.html

10.14.4. Replacement of the additional resistor of a heater

You will need a screw-driver with a crosswise edge.

1. Disconnect a wire from the minus plug of the storage battery.


3. Wring out a clamp of a block of a plait of wires...	4.... also disconnect a block from the resistor socket.


5. Turn out the fastening screw...	6.... also remove the additional resistor of a heater.

Note

Pay attention to marking of the additional resistor that at replacement to get just the same.

7. Establish the additional resistor as it should be, the return to removal.