Removal and installation of a broad tank. Chery Amulet (since 2006 of release)
Chery Amulet since 2006
1. Car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance
5. Engine
5.1. Features of a design
5.2. Possible malfunctions of the engine, their reason and ways of elimination
5.3. Compression check in cylinders
5.4. Removal and installation of protection of a case of the engine
5.5. Replacement of support of a suspension bracket of the power unit
5.6. Installation of the piston of the first cylinder in the provision VMT of a step of compression
5.7. Removal, defektovka and flywheel installation
5.8. Replacement of details of consolidation of the engine
5.9. Head of the block of cylinders
5.10. Removal and engine installation
5.11. Engine repair
5.12. Greasing system
5.13. Cooling system
5.13.1. Features of a design
5.13.2. Possible malfunctions of system of cooling, their reason and ways of elimination
5.13.3. Removal and installation of electrofans of a radiator of system of cooling
5.13.4. Replacement of a radiator of system of cooling
5.13.5. Replacement of the water pump
5.13.6. Removal and thermostat installation
5.13.7. Removal and installation of a broad tank
5.14. Power supply system
5.15. Catching system паров fuels
5.16. Cистема of production of the fulfilled gases
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Appendices
13. Electric equipment schemes
 






8c4a8411



5-13-7-snyatie-i-ustanovka-rasshiritelnogo-bachka.html

5.13.7. Removal and installation of a broad tank

It be required to you: a key «on 10», пассатижи.
1. Merge liquid from system of cooling of the engine (see. «Replacement of cooling liquid»).

Note
At removal of a broad tank it is unessential to merge cooling liquid from cooling system. It is possible to merge it only from a broad tank at a detachment of hoses, having substituted under a tank suitable capacity.

2. Wring out clamps...
3.... also disconnect a block of a plait of wires from the socket of the sensor of level of cooling liquid.
4. Weaken a collar of fastening of a parootvodyashchy hose of a radiator to the union of a broad tank, having compressed пассатижами its unbent ears, shift a collar on a hose...
5.... also disconnect a hose from the union.
6. Similarly disconnect from the union of a broad tank a parootvodyashchy hose of the thermostat.
7. Weaken a collar of fastening of a liquid hose to a branch pipe of a broad tank, having compressed пассатижами its unbent ears, shift a collar on a hose...
8.... also disconnect a liquid hose from a branch pipe of a broad tank.
9. Remove a decorative guard.
10. Unscrew two nuts of fastening of a broad tank to a body arm...
11.... also remove a broad tank.
12. Establish a broad tank as it should be, the return to removal.
13. Fill in cooling liquid and remove from cooling system air jams (see. «Replacement of cooling liquid»).

«previous page
5.13.6. Removal and thermostat installation
following page»
5.14. Power supply system