Chery Amulet since 2006
1. Car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance
5. Engine
5.1. Features of a design
5.2. Possible malfunctions of the engine, their reason and ways of elimination
5.3. Compression check in cylinders
5.4. Removal and installation of protection of a case of the engine
5.5. Replacement of support of a suspension bracket of the power unit
5.6. Installation of the piston of the first cylinder in the provision VMT of a step of compression
5.7. Removal, defektovka and flywheel installation
5.8. Replacement of details of consolidation of the engine
5.9. Head of the block of cylinders
5.10. Removal and engine installation
5.11. Engine repair
5.12. Greasing system
5.13. Cooling system
5.13.1. Features of a design
5.13.2. Possible malfunctions of system of cooling, their reason and ways of elimination
5.13.3. Removal and installation of electrofans of a radiator of system of cooling
5.13.4. Replacement of a radiator of system of cooling
5.13.5. Replacement of the water pump
5.13.6. Removal and thermostat installation
5.13.7. Removal and installation of a broad tank
5.14. Power supply system
5.15. Catching system паров fuels
5.16. Cистема of production of the fulfilled gases
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Appendices
13. Electric equipment schemes
 






8c4a8411




5-13-5-zamena-vodyanogo-nasosa.html

5.13.5. Replacement of the water pump

The pump remove for repair or replacement at emergence during its work of the noise which level exceeds the usual and which appears at education big radial люфта a pump shaft, and also at leakage of cooling liquid from under consolidation of a shaft of the pump.
Pump dismantling — quite laborious work therefore at its malfunction we recommend to replace the pump assembled.
It be required to you: a face head «on 10», пассатижи with changeable capture and all tools necessary for removal of a belt of a drive of the pump of the hydraulic booster of a steering (see. «Replacement of a belt of a drive of the pump of the hydraulic booster of a steering»), a belt of a drive of the generator and the conditioner compressor (see. «Replacement of a belt of a drive of the generator and the conditioner compressor»), a belt of a drive of the gas-distributing mechanism (see. «Replacement of a belt of a drive of the gas-distributing mechanism and its tension roller»).
1. Merge liquid from system of cooling of the engine (see. «Replacement of cooling liquid»).
2. Remove a belt of a drive of the pump of the hydraulic booster of a steering (see. «Replacement of a belt of a drive of the pump of the hydraulic booster of a steering»).
3. Remove a belt of a drive of the generator and the conditioner compressor (see. «Replacement of a belt of a drive of the generator and conditioner compressor»).
4. Remove a belt of a drive of the gas-distributing mechanism (see. «Replacement of a belt of a drive of the gas-distributing mechanism and its tension roller»)
5. Weaken a collar of fastening of a bringing hose to a branch pipe of the water pump, having compressed пассатижами its unbent ears, shift a collar on a hose...
6.... also disconnect bringing hose from a branch pipe of the water pump.
7. Turn out four bolts of fastening of the water pump to the block of cylinders...
8.... also remove the pump.
9. Clear of the laying remains interfaced surfaces of the block of cylinders...
10.... and cases of the water pump.
11. Establish the water pump and all removed details as it should be, the return to removal.

Good advice
For guaranteed ensuring tightness of interface of the water pump with the block of cylinders put on their surfaces a thin layer of hermetic.

12. Adjust a tension of a belt of a drive of the gas-distributing mechanism (see. «Check and adjustment of a tension of a belt of a drive of the gas-distributing mechanism»), and a belt of a drive of the pump of the hydraulic booster of a steering (see. «Check and adjustment of a tension of a belt of a drive of the pump of the hydraulic booster of a steering»).

«previous page
5.13.4. Replacement of a radiator of system of cooling
following page»
5.13.6. Removal and thermostat installation