4-3-1-proverka-i-regulirovka-natyazheniya-remnya-privoda-nasosa-gidrousilitelya-rulevogo-upravleniya.html
4.3.1. Check and adjustment of a tension of a belt of a drive of the pump of the hydraulic booster of a steeringIt be required to you: keys «on 10», «on 13», a six-sided key «on 8».
|
|
3. Press a thumb on a belt of a drive of the pump of the hydraulic booster of a steering in the middle between pulleys of a cranked shaft and the pump. The deflection should make 5–8 mm at effort of 100 N (10 kgfs). Check a belt condition external survey. If on a belt signs of strong wear or a belt are found is greasy, it is necessary to replace it (see. «Replacement of a belt of a drive of the pump of the hydraulic booster of a steering»). If the deflection of a belt differs from the specified value...
|
4.... weaken a key «on 13» an inhaling of a bolt of back bottom fastening...
|
|
|
5.... and nuts of forward bottom fastening of the pump.
|
6. A six-sided key «on 8» weaken an inhaling of a bolt of the top fastening of the pump...
|
7.... and rotation of an adjusting bolt (a key «on 10») achieve a demanded tension of a belt.
8. Tighten bolts and a nut of fastening of the pump of the hydraulic booster of a steering.
9. Establish into place protection of a case of the engine.
|