4.3.31. Check and adjustment of light of headlights

Check and adjustment of light of headlights carry out on the equipped car (with completely filled fuel tank, a set of tools and a spare wheel).

It be required to you: a key «on 10», a screw-driver with a crosswise edge.

1. Previously check and if necessary finish to norm pressure of air in tires.

Fig. 4.6. Adjustment of light of headlights

2. Establish the car perpendicular to a smooth wall (for example, in garage) at distance of 3 m. Put on a seat of the driver additional cargo in mass of 75 kg. Mark on a wall the screen, as is shown in fig. 4.6. The longitudinal plane of symmetry of the car should pass in the area of 0 on the screen. Rock the car sideways, that самоустановились springs of suspension brackets.

3. Measure on your car height of the centers of headlights from a floor. It will be h distance on the screen.

4. Include a passing beam.

5. It is recommended to regulate the direction of a light spot for each headlight separately. The second headlight during adjustment close an opaque material.

6. Open a cowl and, rotating adjusting screws, adjust situation on the screen of a light spot for each headlight across...	7.... and verticals if the arrangement of light spots does not correspond to drawing.

8. Headlights are considered adjusted when the top borders of the left parts of light spots coincide with the line 4, and vertical lines 1 and 2 pass through points Е1 and Е2 crossings of horizontal and inclined sites of light spots.

If on the car fog lights are established, the direction of their beam of light is necessary for adjusting only on height. Rotating the adjusting screw, achieve, that the top borders of light spots were on lines 4 or slightly below it.