Chery Amulet since 2006
1. Car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
10.1. Features of a design
10.2. Diagnostics of malfunctions of electric equipment
10.3. Assembly blocks
10.4. Storage battery
10.5. Generator
10.6. Starter
10.7. Switch (lock) of ignition
10.8. Electronic control system of the engine (ESUD)
10.9. Ignition system
10.10. Lighting, light and sound alarm system
10.10.1. Features of a design
10.10.2. Possible malfunctions of lighting and light alarm system, their reason and ways of elimination
10.10.3. Replacement of lamps
10.10.4. Block headlight replacement
10.10.5. Replacement of a forward fog light
10.10.6. Replacement of the lateral index of turn
10.10.7. Replacement of a back lamp
10.10.8. Replacement of an additional stoplight
10.10.9. Removal and installation of a plafond of illumination of salon
10.10.10. Control unit replacement with external lighting and illumination of devices
10.10.11. Replacement of podrulevy switches
10.10.12. Removal and installation of a sound signal
10.11. Windscreen cleaner
10.12. Windscreen washer
10.13. Electrofans of system of cooling of the engine
10.14. Electric motor of the fan of system of heating (conditioning) and salon ventilation
10.15. Heating system of back glass
10.16. Removal and installation of the boss of the lighter
10.17. Combination of devices
10.18. Replacement of switches of the dashboard
10.19. Automobile audiosystem
10.20. Replacement of sensors and switches
11. Body
12. Appendices
13. Electric equipment schemes
 






8c4a8411




10-10-11-zamena-podrulevykh-pereklyuchatelejj.html

10.10.11. Replacement of podrulevy switches

It be required to you: a screw-driver with a crosswise edge, бокорезы.
1. Disconnect a minus plug wire from the storage battery.
2. Remove a steering wheel (see. «Removal and installation of a steering wheel»).
3. Remove casings of a steering column (see. «Removal and installation of casings of a steering column»).
4. Press a clamp and separate a block of a plait of wires of a sound signal.
5. Lift up a safety lock of a block of a plait of wires of a safety cushion.
6. Press a clamp...
7.... also separate a block of a plait of wires of a safety cushion.
8. Have a bite a collar.
9. Turn out four screws of fastening of a connecting disk of sound signals and a safety cushion, remove a disk from a steering column.
10. Disconnect blocks of a plait of wires from the socket of the switch of indexes of turn and the switch of a passing/driving beam...
11.... and from the socket of the switch of a cleaner and a windscreen washer.
12. Turn out the screw of fastening of podrulevy switches...
13.... also remove switches from a steering column.
14. Establish the removed details as it should be, the return to removal.

«previous page
10.10.10. Control unit replacement with external lighting and illumination of devices
following page»
10.10.12. Removal and installation of a sound signal