Chery Amulet since 2006
1. Car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
10.1. Features of a design
10.2. Diagnostics of malfunctions of electric equipment
10.3. Assembly blocks
10.4. Storage battery
10.5. Generator
10.6. Starter
10.7. Switch (lock) of ignition
10.8. Electronic control system of the engine (ESUD)
10.9. Ignition system
10.10. Lighting, light and sound alarm system
10.10.1. Features of a design
10.10.2. Possible malfunctions of lighting and light alarm system, their reason and ways of elimination
10.10.3. Replacement of lamps
10.10.4. Block headlight replacement
10.10.5. Replacement of a forward fog light
10.10.6. Replacement of the lateral index of turn
10.10.7. Replacement of a back lamp
10.10.8. Replacement of an additional stoplight
10.10.9. Removal and installation of a plafond of illumination of salon
10.10.10. Control unit replacement with external lighting and illumination of devices
10.10.11. Replacement of podrulevy switches
10.10.12. Removal and installation of a sound signal
10.11. Windscreen cleaner
10.12. Windscreen washer
10.13. Electrofans of system of cooling of the engine
10.14. Electric motor of the fan of system of heating (conditioning) and salon ventilation
10.15. Heating system of back glass
10.16. Removal and installation of the boss of the lighter
10.17. Combination of devices
10.18. Replacement of switches of the dashboard
10.19. Automobile audiosystem
10.20. Replacement of sensors and switches
11. Body
12. Appendices
13. Electric equipment schemes
 






8c4a8411




10-10-7-zamena-zadnego-fonarya.html

10.10.7. Replacement of a back lamp

It be required to you: a key «on 8», a screw-driver with a flat edge.
1. Disconnect a wire from the minus plug of the storage battery.
2. Remove a part of an upholstery of the luggage carrier, closing a lamp.
3. Compress clamps...
4.... also separate blocks of a plait of wires of the lamp established in a back wing.
5. Unscrew three nuts of fastening of a lamp...
6.... also remove a lamp.
7. Establish a lamp as it should be, the return to removal.
8. Turn on 90 ° a clamp of a cover of a lamp...
9.... also cast away a cover.
10. Unscrew four nuts of fastening of a lamp to the internal panel of a door of a back.
11. Separate a block of a plait of wires of a lamp of a door of a back.
12. Remove an overlay of a door of a back (see. «Replacement of the lock and the switch of the lock of a door of a back») also remove a lamp.
13. Establish a lamp as it should be, the return to removal.

«previous page
10.10.6. Replacement of the lateral index of turn
following page»
10.10.8. Replacement of an additional stoplight