Replacement of additional safety locks and relay of system of injection of fuel. Chery Amulet (since 2006 of release)
Chery Amulet since 2006
1. Car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
10.1. Features of a design
10.2. Diagnostics of malfunctions of electric equipment
10.3. Assembly blocks
10.3.1. Arrangement of safety locks and relay
10.3.2. Replacement of safety locks and the relay in assembly blocks
10.3.3. Removal and installation of the assembly block of salon
10.3.4. Removal and installation of the block of the relay and safety locks of headlights and conditioner
10.3.5. Removal and installation of the block of the relay and safety locks of electrofans of system of cooling
10.3.6. Removal and installation of the block of power safety locks
10.3.7. Replacement of additional safety locks and relay of system of injection of fuel
10.4. Storage battery
10.5. Generator
10.6. Starter
10.7. Switch (lock) of ignition
10.8. Electronic control system of the engine (ESUD)
10.9. Ignition system
10.10. Lighting, light and sound alarm system
10.11. Windscreen cleaner
10.12. Windscreen washer
10.13. Electrofans of system of cooling of the engine
10.14. Electric motor of the fan of system of heating (conditioning) and salon ventilation
10.15. Heating system of back glass
10.16. Removal and installation of the boss of the lighter
10.17. Combination of devices
10.18. Replacement of switches of the dashboard
10.19. Automobile audiosystem
10.20. Replacement of sensors and switches
11. Body
12. Appendices
13. Electric equipment schemes
 










10-3-7-zamena-dopolnitelnykh-predokhranitelejj-i-rele-sistemy-vpryska-topliva.html

10.3.7. Replacement of additional safety locks and relay of system of injection of fuel

Fig. 10.5. Additional safety locks and relay of system of injection of fuel

The arrangement of additional safety locks and the relay of system of injection is shown on fig. 10.5, their appointment is given in tab. 10.5.

Table 10.5 Purpose of additional safety locks and relay of system of injection of fuel

You will need a key «on 10».
1. Disconnect a wire from the minus plug of the storage battery.
3. Unscrew a nut of fastening of the block of safety locks and the relay...
4.... also take the block from an airinflow box.
5. For replacement of the fused safety lock remove a protective cover...
6.... also take a safety lock from the contact socket of the block.
7. Establish in the contact socket a safety lock of the same face value, as removed.
8. In need of replacement take the relay from the assembly block, shaking it here and there, and establish the new relay.
9. Establish the block of safety locks and the relay and facing of a box of airinflow as it should be, the return to removal.

«previous page
10.3.6. Removal and installation of the block of power safety locks
following page»
10.4. Storage battery