|
11-9-10-snyatie-i-ustanovka-obivki-zadnejj-dveri.html
11.9.10. Removal and installation of an upholstery of a back doorYou will need a screw-driver with a crosswise edge.
|
|
|
|
1. Take a decorative slip.
|
2. Turn out the fastening screw...
|
|
Note
The screw of fastening of an upholstery at the same time attached also a hand-rail in an armrest.
|
|
|
|
|
3.... take a hand-rail...
|
4.... wring out clamps...
|
|
|
|
|
5.... disconnect a block of wires from the control unit a back window regulator and remove a hand-rail.
|
6. Turn out the button of shutdown of the lock of a door...
|
|
|
|
|
7.... also remove it.
|
8. Remove a frame of the internal handle of a back door.
|
|
|
|
|
9. Turn out two bottom screws of fastening of an upholstery.
|
10. Hook upholstery edge...
|
11.... and, overcoming elastic resistance of holders, remove an upholstery of a back door.
|
Note
The upholstery of a back door (a view from a reverse side) is attached to the door panel by four plastic holders. The damaged holders replace new, having taken out them from arms.
|
|
|
|
|
12. Turn out two screws of fastening and remove an arm.
|
|
14. For receiving access to fittings knots in a door unstick from the door panel a polyethylene vlagozashchitny film.
15. Establish an upholstery of a back door and all removed details upside-down.
| 