Chery Amulet since 2006
1. Car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
11.1. Features of a design
11.2. Possible malfunctions of a body, their reason and ways of elimination
11.3. Removal and installation of facing of a radiator
11.4. Removal, dismantling and installation of bumpers
11.5. Removal and installation of mudguards of wheels and podkrylok
11.6. Removal and installation of a forward wing
11.7. Removal and installation of a lattice and facing of a box of airinflow
11.8. Cowl
11.9. Lateral doors
11.9.1. Removal and installation of an upholstery of a forward door
11.9.2. Replacement of glass of a forward door
11.9.3. Replacement of a window regulator of a forward door
11.9.4. Replacement of the external handle of a forward door
11.9.5. Replacement of the internal handle of a drive of the lock of a forward door
11.9.6. Replacement of the switch of the lock of a forward door
11.9.7. Replacement of the lock of a forward door
11.9.8. Replacement of the limiter of opening of a forward door
11.9.9. Removal and installation of a forward door
11.9.10. Removal and installation of an upholstery of a back door
11.9.11. Replacement of glass of a back door
11.9.12. Replacement of a window regulator of a back door
11.9.13. Replacement of the external handle of a back door
11.9.14. Replacement of the internal handle of a drive of the lock of a back door
11.9.15. Replacement of the lock of a back door
11.9.16. Replacement of the limiter of opening of a back door
11.9.17. Removal and installation of a back door
11.10. Back door
11.11. Removal and installation of a cover of the hatch of a bulk pipe of a fuel tank
11.12. Seats
11.13. Removal and installation of facing of a tunnel of a floor
11.14. System of passive safety (SRS)
11.15. Removal and installation of external rear-view mirrors
11.16. Removal and installation of casings of a steering column
11.17. Dashboard
11.18. Heater and conditioner
11.19. Salon fittings
11.20. Screen wiper of a wind window
11.21. Replacement of a motionless glazing of a body
11.22. Care of a body
12. Appendices
13. Electric equipment schemes
 






8c4a8411




11-9-11-zamena-stekla-zadnejj-dveri.html

11.9.11. Replacement of glass of a back door

It be required to you: a face head «on 10», a screw-driver with a flat edge.
1. Disconnect a wire from the minus plug of the storage battery.
2. Remove an upholstery of a back door and a vlagozashchitny film (see. «Removal and installation of an upholstery of a back door»).
3. Accurately hook a screw-driver sealant edge...
4.... also remove the internal...
5.... and external sealant of glass of a back door.
6. Connect blocks of a plait of wires to the control unit a window regulator and a wire to the minus plug of the storage battery. Bring the slider of a window regulator so that its bolts of fastening coincided with technological openings.
7. Turn out two bolts of fastening of glass to the toddler of a window regulator and accurately lower glass down.
8. Turn out a bolt of fastening directing opuskny glass...
9.... also take directing of a doorway.
10. Remove motionless glass...
11.... and it is accurate, trying not to damage a paint and varnish covering, take opuskny glass from a door up.
12. Establish glass of a back door as it should be, the return to removal.
«previous page
11.9.10. Removal and installation of an upholstery of a back door		 following page»
11.9.12. Replacement of a window regulator of a back door