11.9.12. Replacement of a window regulator of a back door

It be required to you: a face head «on 10», a screw-driver with a flat edge.

1. Disconnect a wire from the minus plug of the storage battery.

2. Remove an upholstery of a back door and a vlagozashchitny film (see. «Removal and installation of an upholstery of a back door»).	3. Connect blocks of wires to a command key a window regulator and a wire to the minus plug of the storage battery. Bring the slider of a window regulator so that its bolts of fastening coincided with technological openings.

4. Turn out two bolts of fastening of glass to the toddler of a window regulator and accurately lift glass up.	5. Fix opuskny glass in any available way, for example, accurately having established in a raspor between glass and the internal panel of a door two screw-drivers.

6. Compress clamps...	7.... also separate blocks of a plait of wires of a window regulator.

8. Unscrew two nuts of fastening of a motor-reducer of a window regulator to the internal panel of a back door.

9. Turn out four bolts of fastening directing a window regulator to the internal panel of a door...	10.... also take a window regulator from a door cavity through a technological window in its internal panel.

11. Establish a window regulator and all earlier removed details upside-down.