Chery Amulet since 2006
1. Car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance
5. Engine
5.1. Features of a design
5.2. Possible malfunctions of the engine, their reason and ways of elimination
5.3. Compression check in cylinders
5.4. Removal and installation of protection of a case of the engine
5.5. Replacement of support of a suspension bracket of the power unit
5.6. Installation of the piston of the first cylinder in the provision VMT of a step of compression
5.7. Removal, defektovka and flywheel installation
5.8. Replacement of details of consolidation of the engine
5.9. Head of the block of cylinders
5.10. Removal and engine installation
5.11. Engine repair
5.12. Greasing system
5.13. Cooling system
5.14. Power supply system
5.14.1. Features of a design
5.14.2. Check of pressure of fuel in a power supply system
5.14.3. Pressure decrease in a power supply system
5.14.4. Removal and installation of the air filter
5.14.5. Replacement of the module of the fuel pump
5.14.6. Replacement of a regulator of pressure of fuel
5.14.7. Replacement of a fuel tank
5.14.8. Removal and installation of a fuel stage
5.14.9. Removal, installation and check of nozzles
5.14.10. Adjustment and replacement of a cable of a drive of a butterfly valve
5.14.11. Removal and installation of throttle knot
5.14.12. Check and replacement of a regulator of idling
5.14.13. Removal and installation of a pedal of an accelerator
5.15. Catching system паров fuels
5.16. Cистема of production of the fulfilled gases
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Appendices
13. Electric equipment schemes
 






8c4a8411




5-14-4-snyatie-i-ustanovka-vozdushnogo-filtra.html

5.14.4. Removal and installation of the air filter

The air filter remove at its damage and for receiving access to other units in a motor compartment.
It be required to you: a key «on 10», a screw-driver with a crosswise edge.
1. Weaken an inhaling of a collar of fastening of a taking-away hose of system of ventilation of a case of the engine to the union of the air filter...
2.... also disconnect a hose from the union.
3. Weaken an inhaling of a collar of fastening of an airbringing sleeve to the filter...
4.... also disconnect a sleeve from a filter branch pipe.
5. Weaken an inhaling of a collar of fastening of an airbringing sleeve to throttle knot...
6.... also remove airbringing sleeve.
7. Weaken an inhaling of a collar of fastening of a taking-away hose of system of ventilation of a case of the engine to the separator union...
8.... also disconnect a hose from a separator.
9. Remove the block of the relay and safety locks of headlights and the conditioner (see. «Removal and installation of the block of the relay and safety locks of headlights and the conditioner») also take away it from the air filter.
10. Turn out two bolts of fastening of an air line of the air filter to a forward cross-piece of a motor compartment.
11. Turn out two bolts of fastening of the air filter to an engine mudguard...
12.... also remove the air filter together with an air line.
13. Establish details as it should be, the return to removal.

«previous page
5.14.3. Pressure decrease in a power supply system
following page»
5.14.5. Replacement of the module of the fuel pump