Replacement of a regulator of pressure of fuel. Chery Amulet (since 2006 of release)
Chery Amulet since 2006
1. Car device
2. Recommendations about operation
3. Malfunctions in a way
4. Maintenance
5. Engine
5.1. Features of a design
5.2. Possible malfunctions of the engine, their reason and ways of elimination
5.3. Compression check in cylinders
5.4. Removal and installation of protection of a case of the engine
5.5. Replacement of support of a suspension bracket of the power unit
5.6. Installation of the piston of the first cylinder in the provision VMT of a step of compression
5.7. Removal, defektovka and flywheel installation
5.8. Replacement of details of consolidation of the engine
5.9. Head of the block of cylinders
5.10. Removal and engine installation
5.11. Engine repair
5.12. Greasing system
5.13. Cooling system
5.14. Power supply system
5.14.1. Features of a design
5.14.2. Check of pressure of fuel in a power supply system
5.14.3. Pressure decrease in a power supply system
5.14.4. Removal and installation of the air filter
5.14.5. Replacement of the module of the fuel pump
5.14.6. Replacement of a regulator of pressure of fuel
5.14.7. Replacement of a fuel tank
5.14.8. Removal and installation of a fuel stage
5.14.9. Removal, installation and check of nozzles
5.14.10. Adjustment and replacement of a cable of a drive of a butterfly valve
5.14.11. Removal and installation of throttle knot
5.14.12. Check and replacement of a regulator of idling
5.14.13. Removal and installation of a pedal of an accelerator
5.15. Catching system паров fuels
5.16. Cистема of production of the fulfilled gases
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Appendices
13. Electric equipment schemes
 










5-14-6-zamena-regulyatora-davleniya-topliva.html

5.14.6. Replacement of a regulator of pressure of fuel

Signs of malfunction of a regulator of pressure of fuel:
– unstable operation of the engine;
– engine глохнет idling;
– the increased or lowered frequency of rotation of a cranked shaft idling;
– the engine does not develop full capacity;
– the increased fuel consumption.
Serviceability of a regulator determine by pressure of fuel in a fuel stage at the working engine (see. «Pressure check in a power supply system»).
If pressure is lower or higher than norm, and other elements of system are serviceable, the regulator is faulty. It is necessary to replace it, as it is not maintainable.
The regulator of pressure of fuel is established in the fuel module.
It be required to you: all tools necessary for removal of the module of the fuel pump (see. «Replacement of the module of the fuel pump»), and also stripper of lock rings.
1. Remove the module of the fuel pump (see. «Replacement of the module of the fuel pump»).
2. Disconnect the plug of a "mass" wire from a regulator of pressure of fuel.
3. Unclench a regulator clamp...
4.... also take it from an arm of the module of the fuel pump.
5. Take a regulator of pressure of fuel from a module saddle.
6. Establish details as it should be, the return to removal.

«previous page
5.14.5. Replacement of the module of the fuel pump
following page»
5.14.7. Replacement of a fuel tank